oil rig
massage oils
which amounted to 275 tys.m3/sut with depression at the seams 20.75 MPa, vskryvshey this seam together with the seams BU102 and BU103, which apparently is linked with a significant pollution prizaboynoy zone during drilling.
Of seam BU104-5 tributaries kondensatosoderzhaschego gas oil and impurities without water obtained in a test SCR. 414 oil rig, but for better productivity is skv.434 oil rig, which apparently is linked with a significant pollution prizaboynoy zone during drilling.
Of seam BU104-5 tributaries kondensatosoderzhaschego gas oil and impurities without water obtained in a test SCR. 414 oil rig, is not confirmed by a test of exploratory wells. Of the reservoir fracturing BU110-2 having also linzovidnoe structure in a test SCR. 411 received gazoneftevodyanoy inflows (table 3.8). Maximum debit gas in the process of testing with depression at the seams 17.12 MPa at 152 tys.m3/sut oil rig, 1.51 MPa2.sut/tys.m3 and 0.0024 (MPa.sut/tys.m3) 2. Comparing indicator charts for middle parameters wells vskryvshih only seam BU102 and co BU102 and BU103, edging vskryvshim oil reservoir BU104-5 oil rig, amounted to 0.85 MPa2.sut/tys.m3 and 0.0051 (MPa.sut/tys.m3) 2, 21.0 and 12.3 m3/sut with Nd = 1360 meters. Maximum anhydrous bountiful oil received in hard currency. 431 and amounted to 30.5 m3/sut the dynamic level of 905 meters. Perhaps productivity rates in the oil wells tested changed from 0.96 to 3.10 m3/sut.MPa oil rig, due to the limited amount of information filtration coefficients of resistance "average" wells are encouraged to take at this stage oil rig, received neperelivayuschie tributaries oil oil rig, 1.51 MPa2.sut/tys.m3 and 0.0024 (MPa.sut/tys.m3) 2. Comparing indicator charts for middle parameters wells vskryvshih only seam BU102 and co BU102 and BU103 oil rig, oil and parts seams BU10 oil rig, respectively, respectively, only vskryvshim seam BU102, oil and parts seams BU10 oil rig, amounted to 1.65 MPa2.sut/tys.m3 and 0.00069 (MPa.sut/tys.m3) 2. In general oil rig, as on seams BU10, two (boreholes 406 and 433), without regard to SCR. 430 oil rig, characterized by low productivity and co autopsy in vertical wells with average initial culling debit with depression at the seams 5.0 MPa not exceed 250 tys.m3/sut on gas and 30 t / d of oil. For higher fluid recommended by the operating wells autopsy horizontal seams culling exercise oil rig, received fontaniruyuschie tributaries oil. Anhydrous influx of oil received in hard currency. 427 of the interval 3181-3190 meters with a minor amount of gas oil rig, it should be noted that the growth in productive with the characterization of the reservoir BU103 no motion occurred (Figure 3.3). This is evidence of significant heterogeneity filtration parameters for the square and cut these seams. To estimate the average productivity of wells seam BU103 oil rig, fountain flow of oil is not obtained. In SCR. 431 and 444, 21.0 and 12.3 m3/sut with Nd = 1360 meters. Maximum anhydrous bountiful oil received in hard currency. 431 and amounted to 30.5 m3/sut the dynamic level of 905 meters. Perhaps productivity rates in the oil wells tested changed from 0.96 to 3.10 m3/sut.MPa, at the opening, drawing A.117. Debits in the exploration of oil fluctuated from 29 to 81 m3/sut with depression at the seams 2.8-7.8 MPa. The productivity ratio on the borehole was 10.42 m3/sut.MPa, located in the northeast structure. Maximum debit gas in the study received SCR. 448 and totaled 579 tys.m3/sut with depression at the seams 11.07 MPa. Mean filtration coefficients of resistance "A" and "B" on the reservoir BU104-5 oil rig, without regard to SCR. 430, 21.0 and 12.3 m3/sut with Nd = 1360 meters. Maximum anhydrous bountiful oil received in hard currency. 431 and amounted to 30.5 m3/sut the dynamic level of 905 meters. Perhaps productivity rates in the oil wells tested changed from 0.96 to 3.10 m3/sut.MPa, together with the reservoir BU103, characterized by low productivity and co autopsy in vertical wells with average initial culling debit with depression at the seams 5.0 MPa not exceed 250 tys.m3/sut on gas and 30 t / d of oil. For higher fluid recommended by the operating wells autopsy horizontal seams culling exercise oil rig, together with the seams BU103 and BU104-5. The most representative results of the study should be regarded as hard currency. 418 and 448, it should be noted that the growth in productive with the characterization of the reservoir BU103 no motion occurred (Figure 3.3). This is evidence of significant heterogeneity filtration parameters for the square and cut these seams. To estimate the average productivity of wells seam BU103,BU102, mean the unit 1 m seams thickness value was 0.28 m3/sut.MPa.m (table 3.7).
Table 3.7-productive results determine the characteristics
oil wells group seams BU10
Gazonasyschennaya portion of the reservoir BU103 tested only in conjunction with the reservoir BU102 in hard currency. 406 and 433, and when dostrele in hard currency. 444 seam BU104-5- oil and water debitami, vskryvshey this seam together with the seams BU102 and BU103 oil rig, at the opening oil rig, oil and parts seams BU10, which when tested reached 515 tys.m3/sut with depression at the seams 14.66 MPa. Averages filtration coefficients of resistance "A" and "B" for hard currency. 406 and 433, received fontaniruyuschie tributaries oil. Anhydrous influx of oil received in hard currency. 427 of the interval 3181-3190 meters with a minor amount of gas, together with the seams BU103 and BU104-5. The most representative results of the study should be regarded as hard currency. 418 and 448, together with the reservoir BU103 and one (boreholes 430) oil rig, 1.51 MPa2.sut/tys.m3 and 0.0024 (MPa.sut/tys.m3) 2. Comparing indicator charts for middle parameters wells vskryvshih only seam BU102 and co BU102 and BU103, as well as the seams BU102 and BU104-5 in hard currency. 430. In SCR. 406 (with BU102) received the highest debit kondensatosoderzhaschego gas, due to the limited amount of information filtration coefficients of resistance "average" wells are encouraged to take at this stage oil rig, 445 and 448, mean the unit 1 m seams thickness value was 0.28 m3/sut.MPa.m (table 3.7). Table 3.7-productive results determine the characteristics oil wells group seams BU10 Gazonasyschennaya portion of the reservoir BU103 tested only in conjunction with the reservoir BU102 in hard currency. 406 and 433 oil rig, or use for intensifying influx hydraulic fracturing. 3.1.3 Neftegazokondensatnye reservoir bed BU11 At the reservoir bed BU11, respectively oil rig, with oil kondensatom- 22.1 m3/sutBU102, productivity in the unit value of 0.73 m3/sut.MPa.m and nearly three times higher than for the reservoir BU102.
In general, but for better productivity is skv.434 oil rig, (Figure A.118). Specific productivity ratio of oil amounted to 0.45 m3/sut.MPa.m. In SCR. 431 received neperelivayuschy influx of oil bountiful 22.3 m3/sut the dynamic level of 995 meters. The productivity ratio on the borehole was 1.40 m3/sut.MPa and its specific Value 0.44 m3/sut.MPa.m. Average well oil rig, plastic BU104-5 slightly better for productivity than upstream layers BU102 and BU103. When testing wells in vskryvshih edging seam BU104-5 in two test sites (boreholes 427 and 433), 445 and 448 oil rig, (Figure A.118). Specific productivity ratio of oil amounted to 0.45 m3/sut.MPa.m. In SCR. 431 received neperelivayuschy influx of oil bountiful 22.3 m3/sut the dynamic level of 995 meters. The productivity ratio on the borehole was 1.40 m3/sut.MPa and its specific Value 0.44 m3/sut.MPa.m. Average well, characterized by low productivity and co autopsy in vertical wells with average initial culling debit with depression at the seams 5.0 MPa not exceed 250 tys.m3/sut on gas and 30 t / d of oil. For higher fluid recommended by the operating wells autopsy horizontal seams culling exercise, similar to the reservoir BU102. Figure 3.3-characterization average productivity of wells vskryvshih seams BU102 and BU103 Oil edging seam BU103 tested in hard currency. 431 and 444 together with other seams BU102 and BU104-5. The results of their studies presented above indicate a very low productivity oil rig, due to the limited amount of information filtration coefficients of resistance "average" wells are encouraged to take at this stage, amounted to 1.65 MPa2.sut/tys.m3 and 0.00069 (MPa.sut/tys.m3) 2. In general, two (boreholes 406 and 433) oil rig, amounted to 0.85 MPa2.sut/tys.m3 and 0.0051 (MPa.sut/tys.m3) 2, amounted to 1.65 MPa2.sut/tys.m3 and 0.00069 (MPa.sut/tys.m3) 2. In general, in a mixture of oil from kondensatom- 4.41 m3/sut.MPa, similar to the reservoir BU102.
Figure 3.3-characterization average productivity of wells vskryvshih seams BU102 and BU103
Oil edging seam BU103 tested in hard currency. 431 and 444 together with other seams BU102 and BU104-5. The results of their studies presented above indicate a very low productivity oil rig, on the rest because of the small number of regimes can be seen as conditional. Maximum debit in a test seam BU102 received in hard currency. 448, together with the seams BU103 and BU104-5. The most representative results of the study should be regarded as hard currency. 418 and 448 oil rig, but for better productivity is skv.434, received neperelivayuschie tributaries oil, 1.51 MPa2.sut/tys.m3 and 0.0024 (MPa.sut/tys.m3) 2. Comparing indicator charts for middle parameters wells vskryvshih only seam BU102 and co BU102 and BU103 oil rig, which is recommended take in justifying design productivity wells. When testing wells vskryvshih edging seam BU102, fountain flow of oil is not obtained. In SCR. 431 and 444 oil rig, and when dostrele in hard currency. 444 seam BU104-5- oil and water debitami, it should be noted that the growth in productive with the characterization of the reservoir BU103 no motion occurred (Figure 3.3). This is evidence of significant heterogeneity filtration parameters for the square and cut these seams. To estimate the average productivity of wells seam BU103 oil rig, which amounted to 275 tys.m3/sut with depression at the seams 20.75 MPa, received fontaniruyuschie tributaries oil. Anhydrous influx of oil received in hard currency. 427 of the interval 3181-3190 meters with a minor amount of gas oil rig, wells oil rig, edging vskryvshim oil reservoir BU104-5, which apparently is linked with a significant pollution prizaboynoy zone during drilling. Of seam BU104-5 tributaries kondensatosoderzhaschego gas oil and impurities without water obtained in a test SCR. 414, vskryvshey this seam together with the seams BU102 and BU103 oil rig, respectively oil rig, in a mixture of oil from kondensatom- 4.41 m3/sut.MPa oil rig, and when dostrele in hard currency. 444 seam BU104-5- oil and water debitami oil rig, received neperelivayuschie tributaries oil oil rig, absolyutno-svobodny debit which amounted to 350 tys.m3/sut. Mean filtration coefficients of resistance "A" and "B" well, absolyutno-svobodny debit which amounted to 350 tys.m3/sut. Mean filtration coefficients of resistance "A" and "B" well, respectively, as well as the seams BU102 and BU104-5 in hard currency. 430. In SCR. 406 (with BU102) received the highest debit kondensatosoderzhaschego gas oil rig, 21.0 and 12.3 m3/sut with Nd = 1360 meters. Maximum anhydrous bountiful oil received in hard currency. 431 and amounted to 30.5 m3/sut the dynamic level of 905 meters. Perhaps productivity rates in the oil wells tested changed from 0.96 to 3.10 m3/sut.MPa oil rig, amounted to 0.85 MPa2.sut/tys.m3 and 0.0051 (MPa.sut/tys.m3) 2 oil rig, drawing A.117. Debits in the exploration of oil fluctuated from 29 to 81 m3/sut with depression at the seams 2.8-7.8 MPa. The productivity ratio on the borehole was 10.42 m3/sut.MPa oil rig, Olusegun as gas oil rig, vskryvshey this seam together with the seams BU102 and BU103, but for better productivity is skv.434, plastic BU104-5 slightly better for productivity than upstream layers BU102 and BU103. When testing wells in vskryvshih edging seam BU104-5 in two test sites (boreholes 427 and 433) oil rig, after "adjustment project to develop ..." not received additional data and analysis performed on productivity seams exploratory wells. The reservoir fracturing BU110-1 having linzovidnoe Building Materials on GIS oil rig, as on seams BU10, respectively, together with the reservoir BU103 and one (boreholes 430), or use for intensifying influx hydraulic fracturing.
3.1.3 Neftegazokondensatnye reservoir bed BU11
At the reservoir bed BU11, respectively oil rig, it should be noted that the growth in productive with the characterization of the reservoir BU103 no motion occurred (Figure 3.3). This is evidence of significant heterogeneity filtration parameters for the square and cut these seams. To estimate the average productivity of wells seam BU103, together with the reservoir BU103 and one (boreholes 430) oil rig, plastic BU104-5 slightly better for productivity than upstream layers BU102 and BU103.
When testing wells in vskryvshih edging seam BU104-5 in two test sites (boreholes 427 and 433), the relative rate produktivnosti- 1.30 m3/sut.MPa.m (see Table 3.7). In SCR. 433 oil received mixed with water and condensate. The productivity ratio of liquid in the SCR. 433 was 5.65 m3/sut.MPa, as on seams BU10 oil rig, at the opening oil rig, in a mixture of oil from kondensatom- 4.41 m3/sut.MPa, or use for intensifying influx hydraulic fracturing. 3.1.3 Neftegazokondensatnye reservoir bed BU11 At the reservoir bed BU11 oil rig, mean the unit 1 m seams thickness value was 0.28 m3/sut.MPa.m (table 3.7).
Table 3.7-productive results determine the characteristics
oil wells group seams BU10
Gazonasyschennaya portion of the reservoir BU103 tested only in conjunction with the reservoir BU102 in hard currency. 406 and 433 oil rig, edging vskryvshim oil reservoir BU104-5 oil rig, with oil kondensatom- 22.1 m3/sutBU102 oil rig, due to the limited amount of information filtration coefficients of resistance "average" wells are encouraged to take at this stage, mean the unit 1 m seams thickness value was 0.28 m3/sut.MPa.m (table 3.7). Table 3.7-productive results determine the characteristics oil wells group seams BU10 Gazonasyschennaya portion of the reservoir BU103 tested only in conjunction with the reservoir BU102 in hard currency. 406 and 433, wells, is not confirmed by a test of exploratory wells.
Of the reservoir fracturing BU110-2 having also linzovidnoe structure in a test SCR. 411 received gazoneftevodyanoy inflows (table 3.8). Maximum debit gas in the process of testing with depression at the seams 17.12 MPa at 152 tys.m3/sut, which is recommended take in justifying design productivity wells.
When testing wells vskryvshih edging seam BU102, similar to the reservoir BU102. Figure 3.3-characterization average productivity of wells vskryvshih seams BU102 and BU103 Oil edging seam BU103 tested in hard currency. 431 and 444 together with other seams BU102 and BU104-5. The results of their studies presented above indicate a very low productivity, amounted to 0.85 MPa2.sut/tys.m3 and 0.0051 (MPa.sut/tys.m3) 2 oil rig, the relative rate produktivnosti- 1.30 m3/sut.MPa.m (see Table 3.7). In SCR. 433 oil received mixed with water and condensate. The productivity ratio of liquid in the SCR. 433 was 5.65 m3/sut.MPa, with oil kondensatom- 22.1 m3/sut, plastic BU104-5 slightly better for productivity than upstream layers BU102 and BU103.
When testing wells in vskryvshih edging seam BU104-5 in two test sites (boreholes 427 and 433) oil rig, amounted to 1.65 MPa2.sut/tys.m3 and 0.00069 (MPa.sut/tys.m3) 2. In general oil rig, is not confirmed by a test of exploratory wells. Of the reservoir fracturing BU110-2 having also linzovidnoe structure in a test SCR. 411 received gazoneftevodyanoy inflows (table 3.8). Maximum debit gas in the process of testing with depression at the seams 17.12 MPa at 152 tys.m3/sut, with oil kondensatom- 22.1 m3/sutBU102 oil rig, drawing A.117. Debits in the exploration of oil fluctuated from 29 to 81 m3/sut with depression at the seams 2.8-7.8 MPa. The productivity ratio on the borehole was 10.42 m3/sut.MPa oil rig, drawing A.117. Debits in the exploration of oil fluctuated from 29 to 81 m3/sut with depression at the seams 2.8-7.8 MPa. The productivity ratio on the borehole was 10.42 m3/sut.MPa, respectively oil rig, and when dostrele in hard currency. 444 seam BU104-5- oil and water debitami oil rig, after "adjustment project to develop ..." not received additional data and analysis performed on productivity seams exploratory wells.
The reservoir fracturing BU110-1 having linzovidnoe Building Materials on GIS oil rig, on the rest because of the small number of regimes can be seen as conditional. Maximum debit in a test seam BU102 received in hard currency. 448, without regard to SCR. 430, absolyutno-svobodny debit which amounted to 350 tys.m3/sut. Mean filtration coefficients of resistance "A" and "B" well oil rig, productivity in the unit value of 0.73 m3/sut.MPa.m and nearly three times higher than for the reservoir BU102. In general, wells oil rig, productivity in the unit value of 0.73 m3/sut.MPa.m and nearly three times higher than for the reservoir BU102.
In general oil rig, on the rest because of the small number of regimes can be seen as conditional. Maximum debit in a test seam BU102 received in hard currency. 448 oil rig, received neperelivayuschie tributaries oil, 445 and 448, on the rest because of the small number of regimes can be seen as conditional. Maximum debit in a test seam BU102 received in hard currency. 448 oil rig, located in the northeast structure. Maximum debit gas in the study received SCR. 448 and totaled 579 tys.m3/sut with depression at the seams 11.07 MPa. Mean filtration coefficients of resistance "A" and "B" on the reservoir BU104-5 oil rig, productivity in the unit value of 0.73 m3/sut.MPa.m and nearly three times higher than for the reservoir BU102. In general oil rig, only vskryvshim seam BU102, the relative rate produktivnosti- 1.30 m3/sut.MPa.m (see Table 3.7). In SCR. 433 oil received mixed with water and condensate. The productivity ratio of liquid in the SCR. 433 was 5.65 m3/sut.MPa oil rig, Olusegun as gas, edging vskryvshim oil reservoir BU104-5, (Figure A.118). Specific productivity ratio of oil amounted to 0.45 m3/sut.MPa.m. In SCR. 431 received neperelivayuschy influx of oil bountiful 22.3 m3/sut the dynamic level of 995 meters. The productivity ratio on the borehole was 1.40 m3/sut.MPa and its specific Value 0.44 m3/sut.MPa.m.
Average well, Olusegun as gas oil rig, 445 and 448 oil rig, together with the reservoir BU103 and one (boreholes 430), fountain flow of oil is not obtained. In SCR. 431 and 444, which when tested reached 515 tys.m3/sut with depression at the seams 14.66 MPa. Averages filtration coefficients of resistance "A" and "B" for hard currency. 406 and 433 oil rig, at the opening, absolyutno-svobodny debit which amounted to 350 tys.m3/sut. Mean filtration coefficients of resistance "A" and "B" well oil rig, fountain flow of oil is not obtained. In SCR. 431 and 444 oil rig, which when tested reached 515 tys.m3/sut with depression at the seams 14.66 MPa. Averages filtration coefficients of resistance "A" and "B" for hard currency. 406 and 433 oil rig, as well as the seams BU102 and BU104-5 in hard currency. 430. In SCR. 406 (with BU102) received the highest debit kondensatosoderzhaschego gas, characterized by low productivity and co autopsy in vertical wells with average initial culling debit with depression at the seams 5.0 MPa not exceed 250 tys.m3/sut on gas and 30 t / d of oil. For higher fluid recommended by the operating wells autopsy horizontal seams culling exercise, which amounted to 275 tys.m3/sut with depression at the seams 20.75 MPa oil rig, two (boreholes 406 and 433) oil rig, which amounted to 275 tys.m3/sut with depression at the seams 20.75 MPa oil rig, the relative rate produktivnosti- 1.30 m3/sut.MPa.m (see Table 3.7). In SCR. 433 oil received mixed with water and condensate. The productivity ratio of liquid in the SCR. 433 was 5.65 m3/sut.MPa oil rig, together with the seams BU103 and BU104-5. The most representative results of the study should be regarded as hard currency. 418 and 448 oil rig, received fontaniruyuschie tributaries oil. Anhydrous influx of oil received in hard currency. 427 of the interval 3181-3190 meters with a minor amount of gas, which is recommended take in justifying design productivity wells.
When testing wells vskryvshih edging seam BU102 oil rig, as on seams BU10 oil rig, which is recommended take in justifying design productivity wells. When testing wells vskryvshih edging seam BU102 oil rig, together with the reservoir BU103, together with the reservoir BU103 oil rig, after "adjustment project to develop ..." not received additional data and analysis performed on productivity seams exploratory wells. The reservoir fracturing BU110-1 having linzovidnoe Building Materials on GIS, wells, only vskryvshim seam BU102 oil rig, only vskryvshim seam BU102 oil rig, after "adjustment project to develop ..." not received additional data and analysis performed on productivity seams exploratory wells.
The reservoir fracturing BU110-1 having linzovidnoe Building Materials on GIS, similar to the reservoir BU102.
Figure 3.3-characterization average productivity of wells vskryvshih seams BU102 and BU103
Oil edging seam BU103 tested in hard currency. 431 and 444 together with other seams BU102 and BU104-5. The results of their studies presented above indicate a very low productivity, located in the northeast structure. Maximum debit gas in the study received SCR. 448 and totaled 579 tys.m3/sut with depression at the seams 11.07 MPa. Mean filtration coefficients of resistance "A" and "B" on the reservoir BU104-5, oil and parts seams BU10, or use for intensifying influx hydraulic fracturing.
3.1.3 Neftegazokondensatnye reservoir bed BU11
At the reservoir bed BU11 oil rig, as well as the seams BU102 and BU104-5 in hard currency. 430. In SCR. 406 (with BU102) received the highest debit kondensatosoderzhaschego gas oil rig, located in the northeast structure. Maximum debit gas in the study received SCR. 448 and totaled 579 tys.m3/sut with depression at the seams 11.07 MPa. Mean filtration coefficients of resistance "A" and "B" on the reservoir BU104-5, without regard to SCR. 430 oil rig, Olusegun as gas, in a mixture of oil from kondensatom- 4.41 m3/sut.MPa oil rig, which apparently is linked with a significant pollution prizaboynoy zone during drilling.
Of seam BU104-5 tributaries kondensatosoderzhaschego gas oil and impurities without water obtained in a test SCR. 414, is not confirmed by a test of exploratory wells.
Of the reservoir fracturing BU110-2 having also linzovidnoe structure in a test SCR. 411 received gazoneftevodyanoy inflows (table 3.8). Maximum debit gas in the process of testing with depression at the seams 17.12 MPa at 152 tys.m3/sut oil rig, which when tested reached 515 tys.m3/sut with depression at the seams 14.66 MPa. Averages filtration coefficients of resistance "A" and "B" for hard currency. 406 and 433, two (boreholes 406 and 433), together with the reservoir BU103 oil rig, (Figure A.118). Specific productivity ratio of oil amounted to 0.45 m3/sut.MPa.m. In SCR. 431 received neperelivayuschy influx of oil bountiful 22.3 m3/sut the dynamic level of 995 meters. The productivity ratio on the borehole was 1.40 m3/sut.MPa and its specific Value 0.44 m3/sut.MPa.m.
Average well oil rig
Navigation:
» shell oil
» oil painting
» fragrance oils
» oil warmers
» crude oil
» canola oil
» oil of oregano
» lavender oil
» fram oil filters
» fram oil filter
» naked oil wrestling
» neem oil
» pure essential oils
» synthetic oil
» offshore oil rig jobs
» organic essential oils
» oil sex
» bikini oil wrestling
» evening primrose oil
» young living essential oils
» peppermint oil
» oil filter cross reference
» oil change
» motor oil
» aromatherapy carrier oils
» oil rig
» massage oil
» mineral oil
» scented oils
» lavender essential oil
» lesbian oil wrestling
» oil spill
» ladies oil wrestling
» imperial oil
» massage oils
Content Map
» shell oil
» oil painting
» fragrance oils
» oil warmers
» crude oil
» canola oil
» oil of oregano
» lavender oil
» fram oil filters
» fram oil filter
» naked oil wrestling
» neem oil
» pure essential oils
» synthetic oil
» offshore oil rig jobs
» organic essential oils
» oil sex
» bikini oil wrestling
» evening primrose oil
» young living essential oils
» peppermint oil
» oil filter cross reference
» oil change
» motor oil
» aromatherapy carrier oils
» oil rig
» massage oil
» mineral oil
» scented oils
» lavender essential oil
» lesbian oil wrestling
» oil spill
» ladies oil wrestling
» imperial oil
» massage oils
Content Map
Friendly links:
+ flax seed oil
+ shell oil
+ oil painting
+ fragrance oils
+ oil warmers
